You should also check:
– Carbon-Fibered BMW X5 M by iND Distribution Looks Marvelous in Melbourne Red and HRE Wheels
– BMW X5 M Looks Smashing on HRE Wheels, Installation by Wheels Boutique
– Video: BMW X5M by G-Power Sounds Extremely Loud
– BMW X5 with Lumma Aero Kit by TopCar
– F15 BMW X5 with golden wheels: black and yellow

The SUV is nothing short of power with an engine capable of outputting 575HP. The sheer force in this vehicle is stunning. Nevertheless, can this be improved? The answer seems to be yes. With this particular model, iND has fitted quite a number of body modifications starting with front and rear bumpers, side skirts and a stylish spoiler. Of course there are plenty more visual modifications. The car looks quite stylish, but iND states that looks are not the only gain for this particular build project.

The folks over at iND claim that this BMW X5 M’s performance is also improved. With a more aerodynamic body structure and an overall lowered structure the BMW X5 M by iND is way faster than its stock counterpart. There is a certain amount of choice as to which parts can be fitted on the BMW X5 M. The smart choice would be to choose the full package in order to fully benefit from the performance gain.

The overall look of the car is more aggressive. The BMW X5 M’s black paint and the darkened windows give it a stealthy look. The body kit adds to the X5 M’s personality by further constructing on the stock manufacturer’s design. The additions made by iND seem to harmoniously fit in with the rest of the car. The whole package is completed by a pair of 22 inch HRE P201 rims, which further add to the stylish, stealthy look of the car.

The BMW X5 M by iND is a successful attempt at improving the overall look of the vehicle while also adding to its performance. This particular reinterpretation keeps the vehicle’s personality and further develops on the BMW X5 M’s particularities. It is this harmony that makes iND one of the best options when it comes to improving your BMW. As stated above the price for this particular upgrade depends on the selected package. The range of choices put on the table by the people over at iND guarantees that there is something appealing for each and everyone.

The post BMW X5 M by iND appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Recently, the folks over iND Distribution tuner have created a special program on a BMW X5 M which can be admired below. The model is standing out from the crowd with new wheels and a carbon fiber aero kit.

Even if the changes at the exterior can be considered subtle, the model does standout from the crowd with new elements, like the already famous Akrapovic exhaust system and the new rear diffuser, announcing a wilder engine growl and more power under the hood.

It also comes with the new HRE P201 alloy wheels, measuring 22 x 10 and 22 x 12.5 at the front and rear, and finished in Frozen Gold. The new wheels perfectly complement the Melbourne Red exterior wrap, providing a more aggressive look.

Besides the new exterior elements and the HRE wheels, this particular BMW X5 M is also equipped with the Brembo brakes and AC Schnitzer lowering springs, with the installation being carried by Wheels Boutique, another leading tuner worldwide.

Under the hood, this Melbourne Red BMW X5 M has not received any modifications, meaning that it still stays faithful to its 4.4-liter V8 TwinPower Turbo engine, with 575 horsepower and 553 lb-ft of torque. This allows a sprint from 0 to 100 km/h in just 4.0 seconds, at a top speed of 250 km/h.

The post Carbon-Fibered BMW X5 M by iND Distribution Looks Marvelous in Melbourne Red and HRE Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Besides the new wheels courtesy of BBS Wheels tuner, the technicians from iND have also installed their own styling bits, in the shape of a carbon fiber aero kit.

We are looking here at a carbon fiber front lip, carbon fiber rear spoiler, adding as well gloss black side gills and diffuser or gloss black kidney grille surrounds, all of them making the car look more aggressive.

As we already know, a car`s personality is shaped out by its wheels, and this M2 Coupe is also a real eye-catcher with the new BBS wheels.

Other features that iND Distribution have also installed refer to the Fall Line suspension system commissioned from Fall Line Motorsports shop, along with front spherical bearings, rear toe adjustment arms, rear upper control arm spherical bearings, camber shims, as well as adjustable swat bar links.

Concerning the engine under the hood, the engineers from iND Distribution has left it intact, meaning that this particular M2 Coupe is still packing the stock 3.0-liter M TwinPower Turbo inline flat-six engine, with 370 horsepower and 465 Nm of torque. This is enough to sprint from 0 to 100 km/h in 4.3 seconds with a DCT and 4.5 seconds with the manual.

You can find out more about the iND`s project in the media gallery below!

The post iND Distribution Equips BMW M2 Coupe with BBS Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

The models can be best previewed in the media gallery below, and judging by the way they look, I must admit that they are the best looking aftermarket models ever built so far.

The heavily modified BMW M2 looks amazingly aggressive and exceptionally well with the plethora of carbon fiber components, including the yellow tinted headlights, carbon fiber splitter, rear diffuser and rear wing, complemented with the eleven-spoke alloy wheels and the M livery. In terms of mechanics, the new M2 is also featured here with updated Brembo brakes, exhaust system or KW suspension system.

Moving on to the BMW M4, the hot shot looks identical with the M2 with the tinted headlights, coming fitted with rather the same styling bits. We should mention here the purple body wrap which replaces the Yas Marina colour, along with carbon fiber front and rear bumpers and new splitter, fixed rear wing, the tuner`s alloy wheels – which increase the car`s aggressive attitude – and a few more with that.

The iND`s M4 has been also adorned with new mechanics, such as updated Brembo brakes with calipers and discs, KW coilover suspension and so forth. From what we know so far, the BMW M2 & M4 by iND Distribution have not received any mods under the hood, both models being equipped with the same high-performance stock engines.

The post 2016 SEMA Show: BMW M2 & M4 by iND Revealed appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

As we can depict from the pictures in the media gallery, the BMW M5 looks a real killer with the Black Sapphire Metallic body wrap, along with the new lowering springs which reduce its ride height and bring it closer to the ground.

Besides the exterior wrap, this lad here is tweaked with a carbon fiber aero kit, consisting of a new front lip, blacked out kidney grilles – an important component for all customized M5s – adding M colors-painted slats, with the mods to be carried on at the rear.

The rear end also helps increase the car`s imposing stance by adding the carbon fiber spoiler on the trunk, carbon fiber diffuser with an extremely standout exhaust system.

The modding list continues with the one-off set of wheels in the shape of the Velos D7 Directional rims, coming with a one-piece monoblock configuration and increasing the car`s gorgeous design.

There were no upgrades carried out under the hood, the BMW M5 by iND Distribution still packing the stock massive 4.4-liter V8 petrol engine, with impressive 560 horsepower and 680 Nm of torque. The entire powertrain allows a sprint from 0 to 100 km/h in just 4.2 seconds, at a topping which is limited at 250 km/h. but if you remove the speed limiter, then you will have a full 300 km/h to enjoy while being on the track.

The model can be admired in the photo gallery below!

The post BMW M5 Is a Killer in iND Carbon Clothing appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

It is also the case of this F82 BMW M4 all wrapped in Mineral White body wrap, which has received the “gentle touch” of the aftermarket specialists from the iND Distribution tuner.

The tuner has first fitted the Mineral White F82 BMW M4 with a new aero kit, such as the front grille set, the iND painted trunk badge as well as the panted front reflectors or the painted side markets.

This BMW M4 is also coming with the Ground Control 5 bolt camber plates, along with the front and rear 12 mm spacers or the 15 mm Swift lowering springs.

Second, the F82 BMW M4 seen here has also received some slight mods under the hood, the tuner adding the JB4 power kit, but unfortunately we do not have the performance figures, but it is predicted to be more impressive than in the stock version.

As a reminder, the F82 BMW M4 is still packing the same 3.0-liter TwinPower Turbo engine, developing 431 horsepower. Thanks to that, the M4 is capable of running in full throttle from 0 to 100 km/h in just 4.1 seconds. Some publications claim 3.9 seconds on the track at Nurburgring. The topping is electronically limited at 250 km/h.

The post F82 BMW M4 by iND Distribution appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

And one solution would be the styling kit available at the Miami based IND Distribution and I would do the same as the owner of this gorgeous F80 BMW M3 did with his car. It received some nice body styling cues and of course, the HRE RS102 wheels, from HRE Wheels tuner.

This F80 BMW M3 is standing out from the crowd with the front lip and rear diffuser from carbon fiber, decklid spoiler, and the new set of lowering springs, which provides the model with a better stance and improves the driving aerodynamics of the car.

Add up the HRE RS102 high-performance wheels and you have a truly unique model. Surely, each customized M3 is unique in its way. And this one does impress with its perfect body lines and wheels.

Under the hood, we might guess that the F80 BMW M3 is still packing the same 3.0-liter BMW TwinPower Turbo engine that made the model famous, delivering 420 horsepower and 500 Nm of torque. This allows it to be very fast, reaching 100 km/h in just 4.1 seconds.

The post F80 BMW M3 Sits on HRE Wheels, Installation by IND Distribution appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

This fine BMW M4 all wrapped with the rarest finish from BMW M Individual catalogue, which is the Pyrite Brown exterior color, has received an astonishing carbon fiber kit, taken from another important tuner, the 3D Design aftermarket shop, which adds up a more muscular and more aggressive overall look.

The 3D Design body kit consists of new carbon fiber composites on the front lip, rear diffuser, side skirts, trunk spoiler, the Eisenmann raer section exhaust system, as well as the KW Variant 3 suspension system. And let`s not forget the special BBW FI-R wheels, coming in matte silver finish and complementing the entire body styling with the Falken high-performance tires.

The work is almost complete, but there are also some modifications carried out under the hood, where our BMW M4 has received a “slight” upgrade. We are talking here about a power boost from the stock 425 horsepower to an impressive 550 horsepower, which makes it really wild on the roads. Even if the might be a spicy one, I would definitely encourage you to take your M4 and let it into the hands of the IND tuning division.

The post IND Distribution Tunes-Up Pyrite Brown BMW M4 appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

While still a ways out from being ready, the M5 is already stunning, and not just because of the Yas Marine Blue paint it wears.

First off, since BMW decided to drop the naturally aspired engines and went for turbocharged, smaller units, tuners have had a blast working on Bimmers. The same is the case with this M5, which saw new, bigger turbochargers from AMG, while also sporting AMS downpipes and KW springs.

This is not much, I agree, but as I stated before this is just a base from which they can build various other projects. As for looks, the blue goes well with the black wheels and various carbon fiber trims. IND calls this F10 BMW M5 test mule Blue Deluge, a name that kind of sings. We shall see where they go from here.

The post IND presents their F10 BMW M5 project appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Fortunately for us, the people of Falken Tire decided to use a fun method.

They fitted their tires on a great track car and let it loose at the hands of a capable pilot. Of course, not just any vehicle would do, so they called IND which offered a high profile E92 BMW M3 build of their, the so called Green Hell. Powered up by an ESS VT2-625 supercharger and various other parts, the car is ideal to burn through the tires.

Behind the wheel they put Daijiro “Dai” Yoshihara, a drift master, and let him at it on the Chuckwalla raceway. The footage captured speaks volumes of the amazing E92 BMW M3 build, almost making you forget the whole point of it. Still, we have to be applaud the way Falken Tire decided to advertise their product, and hope to see more of the Green Hell.

The post IND Green Hell E92 BMW M3 burns Falken tires appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.